Measures To Prevent Phototoxic Injury; Illumination Characteristics (Spectral Composition) - Zeiss OPMI Lumera i Instructions For Use Manual

Safety measures

Measures to prevent phototoxic injury

Illumination characteristics (spectral composition)

Integrated protection filters
Page 16
1)-5)
Several papers dealing with the problem of phototoxicity in ophthalmic
surgery have been published. A comprehensive review of these publications
reveals five aspects of particular concern:
– Illumination characteristics (spectral composition)
– Illumination intensity
– Angle of illumination
– Focus of the light source
– Exposure time to light
In the following, comments on these aspects are given and a description of
how ZEISS, as a manufacturer, makes allowance for them in its systems.
Studies on exposing the eye to light with varying spectral compositions have
been conducted since as early as the 1950s. These studies suggest that the
potential hazard of phototoxic injury to the patient's retina can be reduced by
blocking out the blue and ultraviolet light below a wavelength of 475 nm.
For protection of the retina, ZEISS offers the swing-in retina protection filter
(blue barrier filter) and the stationary UV blocking filter as standard features
of the surgical microscope. This reduces not only the exposure of the patient's
eye to light, but also that of the surgeon.
An important point to note here, however, is that the use of filters will
inevitably change the perceived color of the light. For this reason, the surgeon
may initially have to get used to the changed appearance of the anatomical
structures.
OPMI Lumera i
Version 8.0
G-30-1720-en