Advertisement
INSTALLATION AND INSTRUCTION MANUAL
TD93DLXTARO Series
NOTICE
Due to continuous product improvements, we must reserve the right to change any specifications
and information, contained in this manual at any time without notice. Star Headlight & Lantern
Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to,
the implied warranties of merchantability and fitness for a particular purpose. Star Headlight &
Lantern Co., Inc. shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this manual.
PLIT458 REV. A
12/19/11
Advertisement
Table of Contents
Related Manuals for Star Headlight & Lantern Arrow TD93DLXTARO Series
Summary of Contents for Star Headlight & Lantern Arrow TD93DLXTARO Series
- Page 1 INSTALLATION AND INSTRUCTION MANUAL TD93DLXTARO Series NOTICE Due to continuous product improvements, we must reserve the right to change any specifications and information, contained in this manual at any time without notice. Star Headlight & Lantern Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
- Page 2 Important : This product is used to direct traffic. Improper use may result in vehicular collision, personal injury and/or death. Star Headlight & Lantern Co., Inc., and its subsidiaries shall not be held responsible for damages directly or indirectly caused by improper use of this product.
- Page 3 Mounting Instructions Please Note: These instructions are provided as a general guideline only. Some vehicles may require special mounting, wiring, and/or weather-sealing. This is the sole responsibility of the installer. Star Headlight & Lantern Co., Inc. assumes no responsibility for the integrity of the installation for this or any of its products. 1.
- Page 4 Electrical Connections Please note: If you are connecting a 24VDC version, the Input Power (and bypass power) would be 24VDC in the diagram above. 1. The controller should be installed inside the vehicle where it will not be exposed to moisture. 2.
- Page 5 (Wiring CONT’D) Wiring for Optional Automatic Activation 1. The Traffic Director may also be wired to automatically bypass the TD77-2 (or TD77-2-24) controller On/Off switch and turn on through the use of an alternate power source (i.e. lightbar switch, siren switch, reverse switch, etc.). 2.
- Page 6 (Operation CONT’D) 4. Select the desired pattern (if different from the current pattern) by using any of the Pattern Select buttons. The Pattern Select buttons include Left, Center, Right, and Warn. The selected pattern label should change to red and the light output should mimic exactly the display on the controller.
- Page 7 (Operation CONT’D) Fast Function for Left / Center Out / Right Patterns The "Fast" button provides the user with the option to display any of the patterns (Left, Center Out, or Right) in a "faster" mode. Pressing the "Fast" button once should change the "Fast"...
- Page 8 Replacement Parts CONT’D) TD77-2 Series Controllers The TD77-2 controller, used with all of the traffic directors, contains two ATO "blade-type" fuses located in the back of the controller. The fuses are accessible from the rear of the controller. The 20 amp fuse controls power to the bar light assembly, while the 5 amp fuse powers the controller.
Need help?
Do you have a question about the Arrow TD93DLXTARO Series and is the answer not in the manual?
Questions and answers