Qubic System QS-S25 User Manual page 9

QS-S25
How to turn on safely and use the QS-S25:
Check if everyone around is aware of machine rapid movements.
■
Make sure that no one stands in the range of motion (minimum 1.5 m).
■
Kids should be kept away from the machine.
■
Pets should be kept away from the machine.
■
When the QS-S25 is turned on, it performs start-up calibration.
■
WARNING
QS-220-PL will move automatically after turning it on in order to perform start up
procedure. Please be away of that movement and do not try to interrupt it.
DO NOT interrupt or change the weight of payload mounted to the QS-S25 during
■
start-up calibration.
Motion Lock Switch should be mounted close to the operator of the machine – it
■
has to be easily reachable in every situation.
Check Motion Lock Switch
■
known failure – more information available in chapter 4 on page 27.
Before getting on or off the machine activate Motion Lock Switch.
■
In case of game crash or freeze Motion Lock Switch must be activated before get-
■
ting off the machine.
To check if the machine is in the Motion Lock mode look at the main window of the
QubicManager. Status is visible in the lower left corner of the window:
User Manual R2.0
AT LEAST once a month to reduce the possibility of un-
7