Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Qubic System QS-S25
Summary of Contents for Qubic System QS-S25
- Page 3 QS-S25 The Motion Systems, manufacturer of Qubic System, would like to thank you for choos- ing the QS-S25, an innovative product that helps you to develop highly reliable training and entertainment solutions that reproduce key immersive elements, such as surface textures, acceleration, engine vibrations and vehicle dynamics for multiple types of land, air or sea vehicles.
- Page 4 QS-S25 SUPPORT Our experts are ready to assist you: MotionSystems.eu/Support SEARCH OUR KNOWLEDGE BASE Everything you wish to know is here! MotionSystems.eu/Knowledge SUPPORTED GAMES Racing games and professional simulation software! MotionSystems.eu/Supported-Games YOU ASK, WE ANSWER Frequently asked questions combined with answers! MotionSystems.eu/FAQ...
-
Page 5: Table Of Contents
Contents 1 Important Safety Instructions ......Essential Information ....... Health and Safety Instruction . -
Page 6: Important Safety Instructions
Use the QS-S25 only for its intended purpose, according to instructions. ■ Unplug the QS-S25 from the power supply if it is not used for an extended period ■ or when there is a need to perform hardware installation, maintenance, servicing or repairs. - Page 7 QS-S25 if the ambient temperature is below 4° Celsius (39° Fahren- ■ heit) or above 45° Celsius (113° Fahrenheit). DO NOT use the QS-S25 if it has been damaged, or any component is broken or ■ missing. Please contact technical support. DO NOT use attachments or replacement parts not recommended or approved by ■...
-
Page 8: Health And Safety Instruction
QS-S25 1.2. HEALTH AND SAFETY INSTRUCTION The safety of Qubic System users is the top priority. To protect users and bystanders against injuries caused by mechanical parts movement and electrical connectivity, the following instructions must be strictly performed. WARNING As with any mechanical device, the user is responsible for inspecting the condi- tion of the machine prior to use and adhering to safe operating procedures. - Page 9 QS-220-PL will move automatically after turning it on in order to perform start up procedure. Please be away of that movement and do not try to interrupt it. DO NOT interrupt or change the weight of payload mounted to the QS-S25 during ■ start-up calibration.
- Page 10 Check if connected PC is capable of running the game at stable 90 frames per second or more when VR Headset is used. Lower values can cause VR sickness. DO NOT use QS-S25 if you are pregnant, tired, or under the influence of alcohol or ■ drugs.
-
Page 11: Product Description
QS-S25 PRODUCT DESCRIPTION 2.1. COMPLETE VIEW QS-S25 basic setup overview: Actuators numbering and connections with power cabinets: User Manual R2.0... - Page 12 QS-S25 QS-S25 basic with all additional accessories overview: User Manual R2.0...
-
Page 13: Dimensions
QS-S25 2.2. DIMENSIONS QS-S25 basic setup dimensions: User Manual R2.0... - Page 14 QS-S25 QS-S25 dimensions with accessories : User Manual R2.0...
-
Page 15: Safe Distances
Minimum safe distances from the QS-S25 edges are shown below: INFO Keep in mind that QS-S25 might move during simulation, occasionally check if the safe distances are kept to avoid damages by QS-S25 hitting for example wall or TV screen. 2.4. -
Page 16: Power Requirements
QS-S25 2.5. POWER REQUIREMENTS Power Cabinet (QS-SB2) contains the power supply for connected actuators. If there is no certainty if fuses or entire electrical installation can handle QS-S25, contact qualified electrician. POWER SUPPLY 120V ±10% 230V ±10% Average power consumption... -
Page 17: Installation
■ getting under actuator or any part that can crush or tear them. If you want to use the QS-S25 in an unusual application, and you are not sure, that ■ the desired setup is feasible, please contact, the distributor/reseller. -
Page 18: Interconnections
QS-S25 3.1. INTERCONNECTIONS User Manual R2.0... -
Page 19: Connecting Switch Box With Power Cabinets
QS-S25 3.1.1 CONNECTING SWITCH BOX WITH POWER CABINETS User Manual R2.0... -
Page 20: Connecting Switch Box To The Power Supply
QS-S25 3.1.2 CONNECTING SWITCH BOX TO THE POWER SUPPLY User Manual R2.0... -
Page 21: Connecting Grounding Wires
QS-S25 3.1.3 CONNECTING GROUNDING WIRES User Manual R2.0... -
Page 22: Connecting Building Earthing Wire
QS-S25 3.1.4 CONNECTING BUILDING EARTHING WIRE User Manual R2.0... -
Page 23: Mounting Steering Wheel Module
QS-S25 3.1.5 MOUNTING STEERING WHEEL MODULE In order to mount the QS-DD-20 steering wheel module to the QS-S25 cockpit: 1. Put the QS-DD-20 steering wheel module through the hole in the steering wheel mounting bracket. 2. Screw in 4x M8x16 bolts located on the side of the mounting bracket to the steering wheel module using 6mm hex key. -
Page 24: Software Installation
3.2. SOFTWARE INSTALLATION INFO Note down the QS-S25 serial number before installation as it’s needed to access software download page. The SERIAL NUMBER can be found on the M10 identification label in the XXXXXX-XXXXXX- XXXXX-XXXXXX format. This serial number is also used for activation of FSMI (Force- SeatMI) and MT (Motion Theater) licences - check information on page 26. - Page 25 QS-S25 Check Action Center on the right side panel for a list of actions that requires at- tention: It is possible to solve them one by one or by pressing the Resolve All button. Firmware update may require additional confirmation in the dialogue box.
- Page 26 QS-S25 Close the configuration and return to the main application window. Choose the game and check profile details by clicking on the game tile. Adjust the motion effects intensity to your preferences in the game profile window, scroll down in the window to see all of the settings. You can adjust the settings during the game simulation by pressing ALT+TAB.
- Page 27 QS-S25 Activate profile by clicking the Activate button. Launch the game by clicking the Run the game button. User Manual R2.0...
- Page 28 INFO If you need the serial number to activate other software licences such as ForceSeatMI or ForceSeatDI, it can be found in the Qubic Manager. After connecting the QS-S25 go to Tools and Diagnostics →Devices. Serial num- ber is visible under the device name: WARNING The software is provided ”as is”, without warranty of any kind, express or...
-
Page 29: Maintenance
At least once a month check if Motion Lock Switch is working correctly – turn on the QS-S25 (when no one is using the rig) and push the red button. If the machine turns off and does not react to any signal (turn on simulation or game to check it) then Motion Lock Switch works properly. -
Page 30: Troubleshooting
If a problem occurred abruptly, it could be caused by thermal protection. Turn off ■ QS-S25, disconnect it from power outlets and wait at least 15 minutes to let it cool down. In case of every unclear electrical problem like blown-out fuses or strange be- ■... -
Page 31: Advanced Applications
6.1. ADDING ADDITIONAL DEVICES TO THE MOTION LOCK CIRCUIT If there is necessity to stop other devices, apart from the QS-S25, ML (Motion Lock) and additional customer devices can be controlled by safety relay outputs. In the example application, the E-STOP button is connected to the external safety relay. When the E- STOP is triggered, the safety relay will activate the Motion Lock function, which will stop motion of the platform and additional devices. - Page 32 QS-S25 Example application of single-channel safety relay that controls ML and additional devices : Example wiring diagram of application of one-channel safety relay with E-STOP button: User Manual R2.0...
-
Page 33: Implementing The Working Zone Protection
QS-S25 6.2. IMPLEMENTING THE WORKING ZONE PROTECTION For protection against accidental hit from moving parts of the platform, safety gate with opening sensor* can be connected to safety relay input for activating ML function. When the gate is opened, the safety relay output activates the ML (Motion Lock) function and stops the motions of the platform. -
Page 34: Increasing Safety Level
To apply solutions which require to use power line contactors, Motion Lock connection cables in the QS-SB2 power cabinet needs to be replaced with jumpers, which are not provided with the QS-S25. To prepare jumper, you need to assemble recommended connector as shown below :... -
Page 35: Adding Power-Cut Circuit With E-Stop Button
QS-S25 6.3.2 ADDING POWER-CUT CIRCUIT WITH E-STOP BUTTON If specific SIL/PL rated level needs to be achieved, it might be necessary to install a power cut-off device. Two contactors connected in series and controlled by safety relay can be used to provide or cut-off power line to QS-SB2 power cabinets. When safety function on safety relay input is triggered, a safety relay will switch off the contactors, thus cutting-off the power to the platform. - Page 36 QS-S25 Example wiring diagram of application of power line contactors and one-channel safety relay with E-STOP INFO PE (protective grounding/earthing) connection is omitted for better transparency User Manual R2.0...
-
Page 37: Implementing The Working Zone Protection With Power-Cut Circuit
QS-S25 6.3.3 IMPLEMENTING THE WORKING ZONE PROTECTION WITH POWER-CUT CIRCUIT In example application contactors connected in series provide power line to the QS-SB2 power cabinets. When safety function on safety relay input is triggered, a safety relay will switch off the power contactors, thus cutting-off the power to the platform. -
Page 38: Conformity Information
Electrical and Electronic Equipment for re- cycling. QS-S25 is shipped with wooden cases. If the packaging is no longer needed, it can be fully recycled. QS-S25 is an advanced device and if stored or disposed of incorrectly it could harm the environment or/and other people. -
Page 39: Liability Disclaimer
(including, but not limited to, any damages caused directly or indirectly by any software, or by combining the QS-S25 with any un- suitable element or not other elements not supplied or not approved by Motion Systems for this product). -
Page 40: Warranty
(including, but not limited to, combining the QS-S25 with any unsuitable element, including in par- ticular power supplies, chargers, or any other elements not supplied or approved by Motion Systems for this product). -
Page 41: Copyright
QS-S25 COPYRIGHT Qubic System is a trademark of Motion Systems. All rights reserved. All the contents in this user manual are the intellectual property of Motion Systems. No part of this manual, including the products and software described in it, shall be modified or translated into any language without the prior written permission of Motion Systems.