Qubic System QS-S25 User Manual page 7

QS-S25
DO NOT cover the ventilation holes in the QS-SB2 power cabinet.
■
Keep the power cord plug and the socket dry, clean and dust-free.
■
Protect the power cord from damage caused by being stepped on, rubbed against,
■
or pinched.
DO NOT use the QS-S25 if the ambient temperature is below 4° Celsius (39° Fahren-
■
heit) or above 45° Celsius (113° Fahrenheit).
DO NOT use the QS-S25 if it has been damaged, or any component is broken or
■
missing. Please contact technical support.
DO NOT use attachments or replacement parts not recommended or approved by
■
the manufacturer. If you must to replace the power cord use only certified one
with the same rating as replaced one.
Connect the QS-S25 to a properly grounded outlet only. See grounding connec-
■
tions in section 3.1.3 and 3.1.4.
If you want to increase safety level of the system, you can add external safety
■
devices. For detailed information check section 6 on page 29.
WARNING
Stop using the QS-S25 immediately and contact technical support when the ma-
chine starts to emit unusual noise, smoke or any other suspicious behaviour in-
dicating the machine is not working properly.
User Manual R2.0 5