Page 3
The Motion Systems, manufacturer of Qubic System, would like to thank you for choos- ing the QS-CH2 , an innovative product that helps you develop highly reliable training and entertainment solutions that reproduce key immersive elements, such as surface textures, acceleration, engine vibrations and vehicle dynamics for multiple types of land, air or sea vehicles.
Page 4
NEWS & EVENTS The latest news from the simulation world. QubicSystem.com/News CHECK OUR SOCIAL MEDIA Everything you wish to know is here! facebook.com/qubicsystem SUPPORTED GAMES Racing games and professional simulation software. QubicSystem.com/Supported-Games...
Use the QS-CH2 only for its intended purpose, according to instructions. Unplug the QS-CH2 from the power supply if it is not used for an extended period or when there is a need to perform hardware installation, maintenance, servicing or repairs.
Page 7
QS-CH2 if the ambient temperature is below 4° Celsius (39° Fahren- DO NOT heit) or above 45° Celsius (113° Fahrenheit). use the QS-CH2 if it has been damaged, or any component is broken or DO NOT missing. Please contact technical support.
QS-CH2 1.2. HEALTH AND SAFETY INSTRUCTION The safety of Qubic System users is the top priority. To protect users and bystanders against injuries caused by mechanical parts movement and electrical connectivity, the following instructions must be strictly performed. WARNING As with any mechanical device, the user is responsible for inspecting the condi- tion of the machine prior to use and adhering to safe operating procedures.
Page 9
QS-CH2 . * Check if the whole VR setup is not in range of motion of the machine. * Check if cables are protected from being crushed by the QS-CH2 – place them loosely under the motion rig.
Page 10
Check if connected PC is capable of running the game at stable 90 frames per second or more when VR Headset is used. Lower values can cause VR sickness. use QS-CH2 if you are pregnant, tired, or under the influence of alcohol DO NOT or drugs.
QS-CH2 SYSTEM DESCRIPTION The QS-CH2 is intended to be used as additional yaw and surge table which can be placed under motion cockpit. It is suited to work together with the Qubic System QS- CH1 motion cockpit by providing additional over steering effect. Platform is based on the Qubic System linear actuator technology, which is part of the Qubic Ecosystem and it is compatible with other Qubic System products.
QS-CH2 2.3. TRANSPORTATION WHEELS Transportation wheels can be mounted for transportation purposes. Put the transporta- tion wheels mounting bracket to the mounting points in the front and back of the QS- CH2. Screw both bolts with nuts gradually one by one using 17 mm socket wrench until the bracket is flush against the side of the device and platform is high enough to be transported.
QS-CH2 2.6. SYSTEM SPECIFICATION QS-CH2 2DOF Architecture 100 mm Actuator stroke 160 kg Platform weight 300 kg Gross moving load Excursions -7.2°, 7.2° -50 mm , 50 mm Surge 800 mm/s Maximum velocity 0.8G* Maximum acceleration *Value of acceleration is limited for safety reasons.
QS-CH2 2.7. POWER REQUIREMENTS Power Cabinet (QS-SB2) contains the power supply for connected actuators. If there is no certainty if fuses or entire electrical installation can handle QS-CH2 , contact a qualified electrician. Breaker Converter specification Power consumption specification Average Power...
SeatMI) and MT (Motion Theater) licences. To download the software visit : QubicSystem.com/Download Once the QS-CH2 is installed and connected correctly: Connect power supply cable to the wall socket. Download QubicManager. Proceed with the installation steps and launch the application.
Page 19
QS-CH2 If QubicManager has recognized the QS-220-PL correctly, the status of the machine visible in the lower left corner will change to Connected. Check on the right side panel for a list of actions that requires at- Action Center tention: It is possible to solve them one by one or by pressing the button.
Page 20
QS-CH2 Go to Tools and Diagnostics →Devices and select Configure. Choose correct layout from the list (0+T or 4+T) Scroll down in the window, you can choose one of the operation modes: INFO Q-MODE is unavailable for 120V power supply.
Page 21
QS-CH2 Close the configuration and return to the main application window. Choose the game tile, check profile details by clicking on it. Adjust the motion effects intensity to your preferences in the game profile window, scroll down in the window to see all of the settings. You can adjust the settings during the game simulation by pressing ALT+TAB.
Page 22
QS-CH2 Activate profile by clicking the button. Activate Launch on the game by clicking the button. Run the game User Manual R1.0...
Page 23
QS-CH2 INFO If you need the serial number to activate other software licences such as Force- SeatMI or SeatDI, it can be found in the QubicManager. After connecting the QS- CH2 go to →Devices. Serial number is visible under the...
Waste Electrical and Electronic Equipment for re- cycling. QS-CH2 is an advanced device and if stored or disposed of incorrectly, it could harm the environment or/and other people. Please contact your local authorities for information about nearest collection point.
(including, but not limited to, any damages caused directly or indirectly by any software, or by combining the QS-CH2 with any un- suitable element or not other elements not supplied or not approved by Motion Systems for this product).
(including, but not limited to, combining the QS-CH2 with any unsuitable element, including in par- ticular power supplies, chargers, or any other elements not supplied or approved by Motion Systems for this product).
QS-CH2 COPYRIGHT Qubic System is a trademark of Motion Systems. All rights reserved. All the contents in this user manual are the intellectual property of Motion Systems. No part of this manual, including the products and software described in it, shall be modified or translated into any language without the prior written permission of Motion Systems.