Hydraulic Lift System Controls - Ford 231 Operator's Manual

Figure 15
Clutch and P.T.O. Control Lever
Figure 16
Independent P.T.O. Control Lever
1. Engaged
3. Independent P.T.O.
2. Disengaged
Control Lever
HYDRAULIC LIFT SYSTEM CONTROLS
HYDRAULIC LIFT CONTROL LEVERS
The hydraulic lift control levers are shown in Figure 18.
The outer lever provides implement position control,
the inner lever provides implement "draft control".
Refer to page 24 for details.
1. Clutch Pedal—Engaged
2. Clutch Pedal—Stops Tractor
Only (Live P.T.0.)
3. Clutch Pedal —Stops Tractor
& P.T.O. (Transmission &
Live P.T.O.)
4. P.T.O. Lever—Disengaged (Trans-
mission & Live P.T.O. Only)
5. P.T.O. Lever—Engaged (Trans-
mission & Live P.T.O. Only)
6. P.T.O. Lever
INDEPENDENT P.T.O. CONTROL LEVER
(MANUAL SHIFT TRANSMISSIONS)
The independent P.T.O. control lever is shown in Figure
16. Move the lever sharply to engage or disengage the
P.T.O. The P.T.O. is "independent," which means that it
can be engaged or disengaged while the tractor is either
moving or stopped. Refer to page 22 for detailed oper-
ating instructions.
FLOW CONTROL
The flow control knob is shown in Figure 19. Rotate the
valve knob to speed up or slow down the response of the
hydraulic lift system. Refer to page 25 for additional
operating information.
13