Features; Set Up Instructions - netvox RA02G User Manual

3. Features

⚫ Power supplied by 12V power adapter and PoE splitter
⚫ 2* AAA 1.5V Alkaline batteries as backup power
⚫ Type-C port for audio alerts transmission
⚫ Smoking, noise, and anti-tamper detection
⚫ Power outage detection
⚫ Compatible with LoRaWAN
⚫ Frequency hopping spread spectrum
⚫ Applicable to third-party platforms: Actility/ThingPark, TTN, MyDevices/Cayenne

4. Set up Instructions

On/Off
Turn on
Restart
(back to factory setting)
Power off
Note
Network Joining
Never joined the network
Had joined the network
(not back to factory setting)
Fail to join the network
TM
Class C
Plug in the power adapter.
Note: When the device is powered by backup batteries as the DC power disconnects, the
device cannot be turned on.
Press the function key① for 5 seconds and the green indicator will flash 20 times.
Unplug the power adapter.
1. After powering on, the device will enter the engineering test mode.
2. To avoid the interference of capacitor inductance and other energy storage components, the
interval between On and Off should be 3 minutes when the device is powered by DC
without backup batteries.
Turn on the device to search the network.
The green indicator stays on: Success
The green indicator remains off: Fail
Turn on the device to search the previous network.
The green indicator stays on: Success
The green indicator remains off: Fail
Please check the device verification information on the gateway or consult your platform server
provider.
5