9.35 COMPRESSOR COOLING FAN
9.36 HEAT EXCHANGER COMPARTMENT DOOR
Condense
55/56
Remove the worktop.
Remove the side panels.
Remove the support.
Disconnect and pull out the
cabling.
SAHARA Heat Pump
OPTIFLOW Heat Pump
Open the outer door of the kick plate.
Open the heat exchanger compartment door
completely.
Turn it slightly so that the hinge pins are fully
released from their seats.
To reposition the door, position the pins on the
hinges.
Press down fully so that the hinge pins click back into
their seats.
Technical Support MP
DISASSEMBLY
Loosen the 2 screws that hold the
fan in the lower part.
Lift up the 2 upper holding hooks
and simultaneously remove the
fan.
Press down on the fan latch and
simultaneously remove the fan.
599 796-724 Rev.0.2