Table of Contents
Advertisement
9.15 HEATING ELEMENT – Condense Dryers
Remove the plastic back panel
guard by loosening the 5 screws
indicated by the arrows.
9.16 TEMPERATURE PROBE
Condense
39/56
Remove the 9 screws securing the
heater unit guard.
Heat Pump SAHARA
Remove the worktop.
Remove the left side panel.
Disconnect the 2 heater unit
connectors.
Press the 2 fixing clips and remove
the connector from its seat.
Technical Support MP
DISASSEMBLY
Remove the rubber cable cleat.
Loosen the 2 heater unit fixing
screws.
Turn the entire heater unit slightly
and remove it.
Heat Pump Optiflow
599 796-724 Rev.0.2
Advertisement
Table of Contents
