Electrolux SAHARA Service Manual page 30

9.5 CONTROL BOARD
Using a screwdriver, release the fixing clips
and concurrently raise the entire board
assembly until it is fully removed.
Remove the three screws, which secure the
display board to the control panel.
29/56
To remove the selector board and respective
dial, loosen the two screws that secure the
board to the control panel (do not loosen the
central screw).
Move the clips that secure it in place and raise
it.
In addition to the board, the selector dial will
also be removed: to remove the dial, simply
slip it off the pin
Loosen the 9 fastening screws on the board.
Using a screwdriver unhook the 10 fixing clips
and simultaneously lift up the whole board unit
until it has been completely removed.
Release the hooks securing the display board
to the control panel.
Technical Support MP
DISASSEMBLY
599 796-724 Rev.0.2