Table of Contents
Advertisement
Remove the six screws, which secure the
display board cover and three screws from
selector board.
30/56
Unclip and take out the selector's box.
Carefully take the cover out and pay attention
to the gasket that sits on it.
When reassembing start with the gasket
around "MACS In". Using a thin screwdriver put
it in the right position, paying attention not to
break it, and simultaneously place the cover on
the UI board
DISASSEMBLY
Release the hooks securing the display board
to the control panel.
Technical Support MP
599 796-724 Rev.0.2
Advertisement
Table of Contents
