9.9
PLASTIC DOOR MICRO-SWITCH LEVER
9.10 TRANSPARENT DOOR HANDLE, LATCH AND HINGE
Unscrew the 4 perimetral screws that
attach the hinge unit to the door.
Using a screwdriver and taking care
not to damage the frame, remove the
whole hinge unit.
33/56
Insert the door micro-switch lever
so that the reference pocket is
positioned towards the inside the
inner frame and it coincides with the
notch in the outer frame.
Unscrew the remaining 8 screws that hold the frame to the
door and remove it.
Loosen the two screws securing the handle assembly and
remove it by pushing it out
Technical Support MP
DISASSEMBLY
599 796-724 Rev.0.2