Electrolux SAHARA Service Manual page 55

9.33 FRONT AIR CONDUIT
Condense
9.34 FRONT AIR SEAL
SAHARA
Once the front air conduit has been removed, the air seal can be removed.
Raise the air seal to remove it completely.
54/56
SAHARA - Heat Pump OPTIFLOW - Heat Pump
OPTIFLOW
When repositioning the front air seal, make sure the joint is positioned as
shown in the figure.
SAHARA
Technical Support MP
DISASSEMBLY
Remove the front panel.
Loosen the 13 screws securing
the front air conduit to the
crossbars, to the tank support
and to the appliance base.
Raise the two crossbars slightly
so as to remove them.
Tilt the entire air conduit
forward and lift it off.
OPTIFLOW
599 796-724 Rev.0.2