Table of Contents
Advertisement
9.4
CONTROL PANEL
Remove the worktop.
Remove the tank.
Loosen the three screws securing the control
panel to the uprights and air conduit.
Remove the worktop. Remove the tank.
Using a small cross-head screwdriver, loosen
the screws (shown by the arrows) securing the
control panel to the front panel.
28/56
Loosen the 2 screws that secure the control
panel to the tank support.
Release the hooks that secure the control
panel to the front panel, which are situated
beside the screw seats (take care not to
break the hooks).
DISASSEMBLY
Turn it forward.
Remove the wiring, making a note of the
position of the various connectors.
Remove the entire control panel.
See description above
Technical Support MP
599 796-724 Rev.0.2
Advertisement
Table of Contents
