Wallenstein BXT4224 Operator's Manual page 17

Wood chipper
Hide thumbs Also See for BXT4224:
Table of Contents

Advertisement

BXT Series
Wood Chipper
7. WARNING!
Explosion hazard
Attempting to charge a frozen battery
can cause it to explode. An explosion
can cause serious injury or death from
projectiles, extreme heat, chemicals,
and loud noise.
Warm the battery to a minimum of
60 °F (16 °C) before charging it.
8. CAUTION!
Turn off the machine before service
or maintenance
Working on a machine that it is not in a
safe condition can cause serious injury
or death.
Stop the engine, remove the key, and
disconnect the spark-plug wire before
starting any service or maintenance
procedures.
9. WARNING!
Machine damage and possible
entanglement hazard
Oversize material will overload the
machine, which can stall the engine
or cause machine damage. Trying to
force material into the machine can
result in serious injury from a fall or
entanglement. Reverse the roller feed
and carefully remove oversize material
from the machine.
Do not place material that is larger than
in diameter into the chipper
4" (10 cm)
hopper. Never try to force material into
the machine.
10. WARNING!
Machine damage and possible
!
entanglement hazard
Oversize material will overload the
machine, which can stall the engine
or cause machine damage. Trying to
force material into the machine can
result in serious injury from a fall or
entanglement. Reverse the roller feed
and carefully remove oversize material
from the machine.
Do not place material that is larger than
in diameter into the chipper
6" (15 cm)
hopper. Never try to force material into
the machine.
11. WARNING!
Wear the necessary PPE
• A hard hat.
• Heavy gloves.
• Hearing protection.
• Protective footwear with
steel toes and slip
resistant soles.
• Protective goggles or a
face shield.
12. WARNING!
Crush and sever hazard
Hands or feet can be crushed or
severed if the machine is operated
with the chipper hopper in the transport
position.
Never operate the wood chipper
with the feed hopper in the transport
position. The chipper hopper must be
lowered and installed in the operating
position.
17
Safety Labels

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bxt6238

Table of Contents