Quick Configuration Page - Waveshare UART-WIFI232-B2 User Manual

UART-WIFI232-B2 User Manual
wireless access point settings, wireless terminal settings, serial port and network settings, Ethernet
function settings, HTTPDClient mode, advanced settings and module management.

4.1.2 QUICK CONFIGURATION PAGE

The quick configuration page provides a method for users to quickly configure UART-WIFI232-B2
serial server. After configuring the parameters according to the steps on the page and restarting the
WIFI serial server, the WIFI serial server can work normally, which reduces the steps and time of
configuration. Of course, there are fewer options on this page, and the detailed configuration should
be configured on the corresponding page.
This page has five options to configure and a restart item, which are explained below:
Wireless configuration: configure the working mode of WIFI, AP or STA mode.

Ethernet function configuration: Enable/disable Ethernet port and set corresponding working

mode.
Serial port configuration: configure serial port parameters, including serial port baud rate, parity

bit, 485 function and so on.
Network configuration: configure network parameters, only related parameters of SocketA.

MQTT configuration: configure MQTT enabling and MQTT connection server related parameters.

re Quick Setup Page
18
Figu
www.waveshare.com