UART-WIFI232-B2 User Manual
Module management: When all the above parameters are configured, click Restart to restart the
module.
4.1.3 MODE SELECTION PAGE
The first page of the Web can be set to select UART-WIFI232-B2 serial server to work in AP mode
or STA mode.
"Data transmission mode" the working modes of WIFI serial server are transparent transmission
mode, serial command mode, HTTPDClient mode and ModbusTCP<=>ModbusRTU mode.
4.1.4 WIRELESS ACCESS POINT SETTINGS PAGE
UART-WIFI232-B2 supports AP interface, through which the WIFI serial server can be managed
very conveniently, and the self-organizing network can be realized. The management page is shown
below. Including the setting of SSID, wireless network mode and wireless security, and the setting of
local area network composed of AP.
Figure wireless mode settings
19
www.waveshare.com