Wired Networking Setup - Waveshare UART-WIFI232-B2 User Manual

UART-WIFI232-B2 User Manual
Consistent with the parameter setting example of WIFI serial server 2.
(4) Restart the WIFI serial server:
AT+Z
Complete the parameter setting.

5.3 WIRED NETWORKING SETUP

Related AT commands are as follows:
Item
1 WMODE
2 WSSSID
3 WSKEY
4 WANN
5 WSLK
6 WAP
7 WAKEY
8 LANN
9 FEPHY
10 FVER
Item
1 NETP
2 TCPB
3 TCPPTB
4 TCPADDB
Webpage configuration as follows:
AT
Table related command list
Set/query WIFI operation mode (AP, STA)
Set/query the SSID of the associated AP
Set/query the encryption parameters in WIFISTA mode
Set/query STA network parameters
Query STA wireless connection status
Set/query the parameters in WIFI AP mode
Set/query the encryption parameters in WIFIAP mode
Set/query module IP in AP mode
Enable/disable the module Ethernet port
Set/query module software version (N-Ver, Z-Ver)
Table Socket related RT command list
Note
Set/query TCPA network protocol parameters
Enable/disable TCPB function
Set/query TCPB port number:
Set/query TCPB server
37
Note
www.waveshare.com