Quick Configuration Page - Waveshare RS232/485 TO WIFI POE ETH (B) User Manual

RS232/485 TO WIFI POE ETH (B) User Manual
selection, wireless access point settings, wireless terminal settings, serial port and network settings,
Ethernet function settings, HTTPDClient mode, advanced settings and module management.

4.1.2 QUICK CONFIGURATION PAGE

The quick configuration page provides a method for users to quickly configure RS232/485 TO
WIFI POE ETH (B) serial server. After configuring the parameters according to the steps on the page
and restarting the WIFI serial server, the WIFI serial server can work normally, which reduces the
steps and time of configuration. Of course, there are fewer options on this page, and the detailed
configuration should be configured on the corresponding page.
This page has five options to configure and a restart item, which are explained below:
WIFI Setting: configure the working mode of WIFI, AP or STA mode.

Ethernet Ports Setting: Enable/disable Ethernet port and set corresponding working mode.

UART Setting: configure serial port parameters, including serial port baud rate, parity bit, 485

function and so on.
Network Setting: configure network parameters, only related parameters of SocketA.

MQTT setting: configure MQTT enabling and MQTT connection server related parameters.

Figure Quick Setup Page
17
www.waveshare.com