Httpdclient Mode Page - Waveshare UART-WIFI232-B2 User Manual

UART-WIFI232-B2 User Manual
This page is used to set the Ethernet port of the module, which can be enabled or disabled.
Moreover, it can be used as a WAN port, so that the module can be used as a secondary router, which
is convenient for users to network. The specific settings page is as follows:

4.1.8 HTTPDCLIENT MODE PAGE

This webpage sets the contents of HTTP protocol header in HTTPDClient mode, including: server
address, server port, request type, protocol header path, protocol header Connection and protocol
header User-Agent. The size of the transmitted data is 1000 bytes. For details about data transmission
method, you can refer to "HTTPDClient" chapter in this user manual.
Figure Ethernet function settings page
23
www.waveshare.com