Wireless Networking Applications; Wireless Networking Applications (Ap) - Waveshare UART-WIFI232-B2 User Manual

UART-WIFI232-B2 User Manual
AT+Z
After restarting, the serial server works in STA mode.
(2) The webpage is set as follows:
For example, log in to the built-in webpage of the serial port server, enter the mode selection
page, and select the Station mode (set the WIFI serial port server to STA mode), as follows:
After clicking OK, enter the module management page and restart to complete the work mode
settings.
The module enables the AP+STA function, which can be set through the AT command
(AT+FAPSTA) or customized to the factory default.

5.2 WIRELESS NETWORKING APPLICATIONS

5.2.1 WIRELESS NETWORKING APPLICATIONS (AP)

The WIFI serial server is used as an AP, and other WIFI serial servers and computers can be
connected to this WIFI serial server as STA. At the same time, it can also be connected through the
UART interface to the user device, as shown in the following figure:
Figure Webpage Mode Setting WIFI Mode
31
www.waveshare.com