Waveshare UART-WIFI232-B2 User Manual page 30

UART-WIFI232-B2 User Manual
1
2
3
4
The webpage configuration is as follows:
The UART-WIFI232-B2 serial port server can be configured as either a wireless STA or an AP.
There are AT commands and web page settings that can be set, as follows:
(1) AT command setting mode: it can be set by AT+WMODE, which can be set as AP or STA.
Example: Set the WIFI serial server to STA mode, and after entering AT command mode, send
the following command:
Set WIFI serial port server to STA mode.
AT+WMODE=STA
restart
Item
NETP
TCPB
TCPPTB
TCPADDB
Figure Wireless Networking Settings webpage
Note
Set/query network protocol parameters for TCPA
Enable/disable TCPB function
Set/query the port number of TCPB
Set/query TCPB servers
30
www.waveshare.com