ICON PRO-FORM CARBON TLX User Manual page 12

9. Route the Upright Wire (74) and the ground wire
(31) through the two Plastic Ties (45).
Next, connect the Upright Wire (74) to the
console wire (G). IMPORTANT: The wire con-
nectors should slide together easily and
snap into place with an audible click. You
must connect the wires properly for your
treadmill to function properly. To see a short
video about how to connect wires, scan the
QR code or go to my.iFIT.com.
Next, connect the Ground Wire (31) to the
console ground wire (J).
Then, insert the wire connectors (74, G, 31, J)
into the opening (H) in the Console Base (84).
10. Do not pinch the Upright Wire (74) during this
step.
Slide the Oval Grommet (75) onto the Upright
Wire (74). Next, insert one side of the Oval
Grommet into the Right Upright (73). Then, press
the other side of the Oval Grommet into the
Right Upright.
11. Raise the treadmill to the position shown.
IMPORTANT: Have a second person hold the
Frame (48) until step 13 is completed.
Next, remove the two 5/16" x 3/4" Screws (2)
from the Latch Crossbar (87).
Then, orient the Latch Crossbar (87) as shown;
make sure that the "This side toward belt"
sticker (L) is facing the treadmill. Attach the
Latch Crossbar to the brackets (M) on the Frame
(48) with the two 5/16" x 3/4" Screws (2) that you
just removed and two 5/16" Star Washers (6).
9
84
10
74
75
11
M
6
2
48
12
H
G
74
J
31
45
45
45
45
73
L
87
M
6
2