Download Print this page

MadgeTech Level2000 Product Information Card

Vented water level and temperature data logger

Advertisement

Quick Links

Description
Temperature Sensor
Temperature Range
Temperature Resolution
Calibrated Accuracy
Pressure Sensor
Measurement Range
Level Resolution
Calibrated Accuracy
±8.3 inches of water (1.0 in typical at 25 °C)
Memory
Sample Rate
Required Interface Package
Baud Rate
Typical Battery Life
Operating Environment
Material
Submersible end:
Dimensions
9.1" x 1.25" dia.
(232 mm x 32 mm dia.)
Submersible End:
Weight
9.1" x 1.25" dia.
(232 mm x 32 mm dia.)
Approvals
Battery Warning
WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT, CHARGE,
FORCE OVER DISCHARGE, DISASSEMBLE, CRUSH, PENETRATE OR INCINERATE. BATTERY MAY
LEAK OR EXPLODE IF HEATED ABOVE 80 °C (176 °F).
1.888.610.7664
Level2000
Internal Semiconductor
-40 °C to +80 °C
0.1 °C
+0.5 °C
Semiconductor (strain gauge)
0 to 30' (0 to 9 m)
0.05" (1.27 mm)
16,383/channel
2 seconds up to 12 hours
IFC110 or IFC200
2,400
1 year
-40 °C to +80 °C (0 to 100%RH)
303 stainless steel
Communications end:
7.1" x 1.2" dia.
(181 mm x 31 mm dia.)
Communications End:
7.1" x 1.2" dia.
(181 mm x 31 mm dia.),
plus cable
CE
www.calcert.com
10
15
20
5
25
0
30
Product Information Card
Level2000
Vented Water Level and Temperature Data Logger
sales@calcert.com
Level2000
Red 485
Dark Blue Pantone 289
Light Blue 58% of Pantone 289

Advertisement

loading

Summary of Contents for MadgeTech Level2000

  • Page 1 Product Information Card Description Level2000 Level2000 Temperature Sensor Internal Semiconductor Temperature Range -40 °C to +80 °C Temperature Resolution 0.1 °C Calibrated Accuracy +0.5 °C Pressure Sensor Semiconductor (strain gauge) Measurement Range 0 to 30’ (0 to 9 m) Level Resolution 0.05”...
  • Page 2 Materials: Small Needle Nose Pliers and a Replacement Battery (TL-2150) The Level2000 is fully submergible and rated IP68. The standard model can be placed in emove the communication port cap. environments with up to 30 feet (9 m) of water. Custom ranged are available and can be Remove the retaining ring using the pliers and white washer.