INFORMATION ABOUT MAINTENANCE
5
5.4 Air filter check
NOTA: Components not necessarily supplied by KOHLER.
1. Pull insert F to unlock cover A.
2. Rotate counter clockwise and remove cover A.
3. clean the inside components A and D with a damp cloth.
4. Do not use compressed air, repeatedly tap the front side E on a flat
surface.
Important
•
When the cartridge G is dirty, do not clean it but replace
cartridges B and G.
5. Fit cartridges G and B.
6. Fit cover A by performing the operations indicated in points 2 and 1
in the reverse order.
5.5 Check of the radiator heat - exchanger surface
Danger
• For safety precautions see
NOTE: Component not necessarily supplied by KOHLER .
Important
• Before proceeding with operation, read
• Wear safety goggles when using compressed air.
•
The radiator heat-exchange surface must be cleaned on both.
1. Check the radiator heat-exchange surface D .
2. Clean the surface with a brush soaked in special detergent if it is
clogged.
EN
42
Chap. 3
.
Par. 3.2.2
.
5.3
5.4
5.5
Fig 5.4