Oil Dipstick On Cylinder Head; Air Filter Check; Check Of The Radiator Heat-Exchanger Surface - Kohler KDI 1903M Owner's Manual

5

5.4 Oil dipstick on cylinder head

Important
• Before proceeding with operation, read
Fig 5.3 - Fig 5.4

5.5 Air filter check

Important
• Before proceeding with operation, read
NOTE: Components not necessarily supplied by KOHLER.
1. Release the two clasps D of the cover A.
2. Remove the cartridges B.
3. Clean the inside components A and C with a damp cloth.
4. Do not use compressed air , repeatedly tap the front side E on
a flat surface.
5. Reinstall:
• cartridges B.
•
the cover A checking the right tightness of clasps D.

5.6 Check of the radiator heat-exchanger surface

Danger
• For safety precautions see
NOTE: Component not necessarily supplied by KOHLER.
Important
• Before proceeding with operation, read
• Wear safety goggles when using compressed air.
•
The radiator heat-exchange surface must be cleaned on both
sides.
1. Check the radiator heat-exchange surface A.
2. Clean the surface with a brush soaked in special detergent if it
is clogged.
EN 30
INFORMATION ABOUT MAINTENANCE
Chap. 3.
Par. 3.2.2.
Par. 3.2.2.
Par. 3.2.2.
Fig 5.5
Fig 5.6