Oil Dipstick On Cylinder Head; Air Filter Check; Check Of The Radiator Heat - Exchanger Surface - Kohler KDI 2504TM Owner's Manual

5.4 Oil dipstick on cylinder head

Important
• Before proceeding with operation, read
Fig 5.3 - Fig. 5.4

5.5 Air filter check

Important
• Before proceeding with operation, read
NOTE: Components not necessarily supplied by KOHLER.
1. Release the two clasps F of the cover A.
2. Remove the cartridge B.
3. Clean the inside components A and D with a damp
cloth.
4. Do not use compressed air , repeatedly tap the front
side E on a flat surface.
5. Reinstall:
cartridge B.

 the cover A checking the right tightness of clasps F.

5.6 Check of the radiator heat - exchanger surface

Danger
• For safety precautions see
NOTE: Component not necessarily supplied by KOHLER.
Important
• Before proceeding with operation, read
• Wear safety goggles when using compressed air.
•
The radiator heat-exchange surface must be cleaned
on both.
1. Check the radiator heat-exchange surface A.
2. Clean the surface with a brush soaked in special
detergent if it is clogged.
Internal Communication: For internal & partner use only.
INFORMATION ABOUT MAINTENANCE
Chap. 3.
Par. 3.2.2.
Par. 3.2.2.
Fig 5.5
Par. 3.2.2.
Fig 5.6
5
31
EN