Remove The Machine From Storage - Wallenstein WX900 Series Operator's Manual

Storage
8.2.1 Replace the Engine Fuel
WARNING!
Before you replace the fuel, read and understand
the information under Engine Operation Safety on
page 21.
1. Remove the current fuel from the engine.
Operate the machine until the fuel tank is empty or drain the
fuel tank and properly dispose of the fuel.
2. Add new fuel to the engine.
For instructions, see Add Fuel to the Engine on page 24.
3. Start the machine.
For instructions, see Start the Machine on page 27.
4. Wait five to 10 minutes for the fuel to flush the carburetor.
5. Stop the machine.
For instructions, see Stop the Machine on page 27.
8.3 Remove the Machine from
Storage
1. Review and follow the Pre-Start Checklist. See page 20
2. Review safety and operation procedures. See Operating
Safety on page 19.
32
WX900 Series
Log Splitter