Delivery Inspection Report - Wallenstein WX900 Series Operator's Manual

Introduction

1.1 Delivery Inspection Report

Wallenstein WX950, WX960, and WX970 Log Splitter
To register your product and start the warranty, go to
This form must be completed by the dealer at the time of delivery, and then signed by the dealer and customer.
I received the product manuals and was thoroughly instructed
about the care, adjustments, safe operation, and applicable
warranty policy.
Customer
Address
City, State/Province, ZIP/Postal Code
( )
Phone Number
Contact Name
Model
Serial Number
Delivery date
Dealer Inspection Checklist
All support stands move freely.
Machine controls function correctly.
All fasteners are torqued to the correct specification.
All grease points are lubricated.
Purchased accessories are included, if applicable.
Operator's Manual is in the storage tube.
Hydraulic system and cylinders function correctly.
Hydraulic controls move freely.
Hydraulic fluid reservoir level is correct.
Hydraulic connections are tight, and hoses and fittings are
in good condition.
There are no hydraulic leaks.
Engine starts and runs, and fluid levels are correct.
WallensteinEquipment.com.
I thoroughly instructed the customer about the equipment care,
adjustments, safe operation, and applicable warranty policy, and
reviewed the manuals with them.
Dealer
Address
City, State/Province, ZIP/Postal Code
( )
Phone Number
Tire pressure is correct (see the tire sidewall).
Tires are in good condition.
Safety Checks
All safety labels are applied and legible.
All guards and shields are installed, and the covers are
closed.
Wheel lug nuts are tightened to the correct torque.
A retainer is installed through each hitch point.
Safety chains are on the ball-mount hitch.
Operating and safety instructions were reviewed.
4
WX900 Series
Log Splitter