Scandomestic IKP 60 User Manual page 46

• If the total number of heating unit of the appliance you choose is not less than 4, the appliance can be
connected directly to the mains by single-phase electric connection, as shown below.
• If the cable is damaged or to be replaced, the operation must be carried out the by after-sale agent with
dedicated tools to avoid any accidents.
• If the appliance is being connected directly to the mains an omnipolar circuit-breaker must be installed with a
minimum opening of 3mm between contacts.
• The installer must ensure that the correct electrical connection has been made and that it is compliant with
safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and replaced by authorised technicians only.
• The bottom surface and the power cord of the hob are not accessible after installation.
Correct disposal of this product
The symbol on the product, or in its packaging, indicates that this product may not be treated as household
wasted, Instead, it should be taken to the appropriate waste collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could otherwise be caused by the
inappropriate waste handling of this product. For more detailed information about the recycling of this
product, please contact your local council, your household waste disposal service, or the shop where you
purchased the product.
44