Scandomestic IKP 60 User Manual page 36

Set the time by touching the slider control. (e.g. 5)
Touch timer control again, the "1" will flash.
Set the time by touching the slider control (e.g.9), now the timer
you set is 95 minutes.
When the time is set, it will begin to count down immediately. The
display will show the remaining time.
NOTE: The red dot next to power level indicator will illuminate
indicating that zone is selected.
When cooking timer expires, the corresponding cooking zone will
be switched off automatically.
Other cooking zone will keep operating if they are turned on previously.
The pictures shown above are for reference only, and the final product shall prevail.
The steps for setting more zones are similar to the steps of setting one zone;
When you set the time for several cooking zones simultaneously, decimal dots of the relevant cooking zones are on. The
minute display shows the min. timer. The dot of the corresponding zone flashes.
The shown as below:
Once the countdown timer expires, the corresponding zone will
switch off. Then it will show the new min. timer and the dot of
corresponding zone will flash.
The shown as right:
set more zones:
(set to 15 minutes)
(set to 45 minutes)
34
(set to 30 minutes)