Care And Cleaning; Hints And Tips - Scandomestic IKP 60 User Manual

• cooking pasta
9 • stir-frying
• searing
• bringing soup to the boil
• boiling water

Care and Cleaning

What?
Switch the power to the cooktop off.
veryday soiling on
E
glass (fingerprints,
Apply a cooktop cleaner while the glass is
marks, stains left by
still warm (but not hot!)
food or non-sugary
Rinse and wipe dry with a clean cloth or
spillovers on the
paper towel.
glass)
Switch the power to the cooktop back on.
Remove these immediately with a fish
Boilovers, melts, and
slice, palette knife or razor blade scraper
sugary spills on
hot
suitable for Induction glass cooktops, but
the glass
beware of hot cooking zone surfaces:
Switch the power to the cooktop off at the
wall.
Hold the blade or utensil at a 30° angle
and scrape the soiling or spill to a cool
area of the cooktop.
Clean the soiling or spill up with a dish
cloth or paper towel.
Follow steps 2 to 4 for 'Everyday soiling on
glass' above.
Spillovers on the Switch the power to the cooktop off.
touch controls
Soak up the spill
Wipe the touch control area with a clean
damp sponge or cloth.
Wipe the area completely dry with a paper
towel.
Switch the power to the cooktop back on.

Hints and Tips

How?
37
Important!
When the power to the cooktop is switched
off, there will be no 'hot surface' indication
but the cooking zone may still be hot! Take
extreme care.
Heavy-duty scourers, some nylon scourers
and harsh/abrasive cleaning agents may
scratch the glass. Always read the label to
check if your cleaner or scourer is suitable.
Never leave cleaning residue on the cooktop:
the glass may become stained.
Remove stains left by melts and sugary food or
spillovers as soon as possible. If left to cool on the
glass, they may be difficult to remove or even
permanently damage the glass surface.
Cut hazard: when the safety cover is retracted, the
blade in a scraper is razor-sharp. Use with extreme
care and always store safely and out of reach of
children.
The cooktop may beep and turn itself off, and
the touch controls may not function while
there is liquid on them. Make sure you wipe
the touch control area dry before turning the
cooktop back on.