Finish Cooking; Using The Boost Function - Scandomestic IKP 60 User Manual

• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display " "will automatically disappear after 1 minute if no suitable pan is placed on it.

Finish cooking

Touching the heating zone selection control that you wish to
switch off
Turn the cooking zone off by touching the slider to " ". Make
sure the displayshows "0"
Turn the whole cooktop off by touching the ON/OFF control.
Beware of hot surfaces
H will show which cooking zone is hot to touch. It will
disappear when the surface has cooled down to a safe
temperature. It can also be used as an energy saving function if
you want to heat further pans, use the hotplate that is still hot.

Using the Boost function

Touching the heating zone selection control.
Touching the boost control
and the power reach Max.
0
Activate the boost function
, the zone indicator show "P"
Cancel the Boost function
31