Related Manuals for Icare PATIENT2
Summary of Contents for Icare PATIENT2
- Page 1 PATIENT2 English iCare PATIENT2 Instruction Manual for Android Rx Only (U.S.)
- Page 2 Google LLC. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Icare Finland Oy is under license. Other trademarks and trade names are those of their respective owners.
-
Page 3: Table Of Contents
9. Connect and transfer measurement data via USB cable ........9 10. View your measurement results................10 10.1. Graph functionality ....................10 10.2. Table functionality ....................11 11. Change the iCare PATIENT2 settings ................ 11 12. Log out from iCare PATIENT2 ..................12 13. Troubleshooting ......................... 13 14. Technical description ...................... 15... -
Page 4: Intended Use
It is indicated for use by healthcare professionals and lay persons. 2. Safety notices WARNING! Make sure that the mobile device with the iCare PATIENT2 app installed is set to the correct time and date. WARNING! Before taking measurements, update the tonometer’s clock to your local time manually from the tonometer’s settings or automatically by connecting the... -
Page 5: Introduction
CLOUD service, providing their tonometer is not registered to a healthcare professional’s iCare CLINIC account. In order to view measurement results with the PATIENT2 app, you need to log in with iCare credentials. For information on how to obtain iCare credentials, see chapter “5. -
Page 6: System Requirements For Icare Patient2
If you are a healthcare professional, you can use iCare PATIENT2 just for transferring eye pressure measurement results to the iCare CLINIC. iCare PATIENT2 does not show measurement results with an iCare CLINIC professional account. For more information on how to operate the HOME or HOME2 devices, see the device’s instruction manual. -
Page 7: Install And Start Using The App
CLINIC credentials. The app is also used for uploading measurement data from iCare HOME (s) or iCare HOME2(s) to the iCare CLINIC, in which case logging into PATIENT2 is not needed. 6. Install and start using the app Open Google Play on your mobile device. -
Page 8: Pair The Tonometer With Your Mobile Device
When the tonometer has been successfully paired, tap CONTINUE on the PATIENT2 screen. You can now tap SYNC to transfer measurement results from the tonometer to iCare CLINIC or iCare CLOUD, or log into the iCare PATIENT2 app, to see your previous measurement results. 8. Transfer measurement data via Bluetooth®... -
Page 9: Connect And Transfer Measurement Data Via Usb Cable
Tip: If your mobile device asks for your permission to use the iCare PATIENT2 app or the tonometer, tap OK. Otherwise, you won’t be able to transfer data and use the app. To avoid having to give the permission every time you use the app, tap the check box in the dialog. -
Page 10: View Your Measurement Results
10.1. Graph functionality Open the iCare PATIENT2 app on your mobile device. If you are not logged in yet, tap LOGIN and enter your iCare credentials. Check chapter “5. Obtain iCare credentials” for information on how to obtain your credentials. -
Page 11: Change The Icare Patient2 Settings
To scroll on the list, slide your finger vertically across the screen. 11. Change the iCare PATIENT2 settings > Settings. To define which values are shown on the graph, tap Max value in graph or Min value in graph, and select the new value. -
Page 12: Log Out From Icare Patient2
CLINIC or iCare CLOUD, but you cannot see them on your mobile device. If you no longer need to use the iCare PATIENT2 app, you can uninstall it. Uninstalling the app will not delete your eye pressure measurement data... -
Page 13: Troubleshooting
13. Troubleshooting Tip: For contact info, such as iCare’s email addresses, tap > Info. Issue Possible explanation and solution You have connected the USB cable to the Make sure you have connected the cable tonometer and your mobile device but correctly to your mobile device. - Page 14 Then tap RETRY or SYNC to try again. 3. Restart your mobile device, open iCare PATIENT2 app, and tap SYNC to try again. You receive the error message Error while Make sure your mobile device is sending measurements to CLINIC.
-
Page 15: Technical Description
Contact your healthcare professional, app. tonometer distributor, or iCare. If the iCare PATIENT2 app is not working correctly, or you find mistakes in this instruction manual, contact info@icare-world.com, or if you are located in the U.S., contact infoUSA@icare-world.com. 14. Technical description When the iCare tonometer is connected to a mobile device with the USB cable provided in the tonometer’s carrying case, or via Bluetooth... -
Page 16: Symbols
If the data connection fails, the measurement results cannot be transferred from the iCare tonometer to the iCare CLINIC database, and the measurement results cannot be viewed. The eye pressure measurement results are displayed in millimeters of mercury (mmHg) with the precision of one millimeter of mercury. The available scale of the y-axis is from 5 mmHg to 50 mmHg. - Page 18 Icare Finland oy. Centervue S.p.A, Icare Finland Oy, and Icare USA Inc. are parts of Reve- nio Group and represent the brand iCare. Not all products, services or offers referenced in this brochure are approved or offered in every market and approved labeling and instructions may vary from one country to another.