Table of Contents
Advertisement
Radio information of your wireless hearing aid
Antenna type
Operation frequency
Occupied bandwidth
(99% BW)
Modulation
Channel
Operating range
Use case
Magnetic field strength
@ 1 m
This symbol indicates that it is important for
the user to read and take into account the
relevant information in these user guides.
This symbol indicates that it is important for
the user to pay attention to the relevant
warning notices in these user guides.
Important information for handling and
product safety.
This symbol confers that the electromagnetic
interference from the device is under limits
approved by the US Federal Communications
Commission.
Indicates the manufacturer's serial number so
that a specific medical device can be identified.
Indicates the manufacturer's catalogue number
so that the medical device can be identified.
Integrated ferrite coil
antenna (inductive)
10.6 MHz
496 kHz
DQPSK
Single channel radio
18 cm (7")
Streaming of audio signal to
receiving hearing aid on the
other ear
3,6 dBμA/m
16. Information and description
of symbols
41
42
43
44
With the CE symbol, Sonova AG confirms that
this product – including accessories – meets the
requirements of the Medical Devices Directive
93/42/EEC as well as the R&TTE Directive
1999/5/EC on radio and telecommunications
equipment. The numbers after the CE symbol
correspond to the code of certified institutions
that were consulted under the above-
mentioned directives.
This symbol indicates that the products
described in these user instructions adhere to
the requirements for an applied part of Type B
of EN 60601-1. The surface of the hearing aid is
specified as an applied part of Type B.
Indicates the medical device manufacturer, as
defined in EU Directive 93/42/EEC.
This symbol indicates that it is important for
the user to read and take into account the
relevant information in this user guide.
Temperature during transportation
and storage: –20° to +60° Celsius
(–4° to +140° Fahrenheit).
Humidity during storage: 0% to 70%, if not in
use. See instruction in chapter 18.2 regarding
drying the hearing aid after use.
Atmospheric pressure during transportation
and storage: 200 hPA to 1500 hPa
During transportation keep dry.
Advertisement
Table of Contents
