Tx Stop (Txstop): Menu 45; Vox (Vox): Menus 46-49 - Leixen VV-898 User Manual

TX Stop (TXStop): Menu 45

The TXStop function disables the transmitter when it
is enabled. If TXStop is enabled, pressing the PTT key
will issue an audible alert tone, indicating that you are
unable to transmit. Select Menu 45, and set it to ON if
you would like to enable this feature. The default
setting is off.

VOX (VOX): Menus 46-49

VOX, or Voice-Operated Transmit, allows you to
transmit by simply speaking into the microphone.
With VOX enabled, you won't need to press the PTT
key to enable the transmitter. Use Menu 46 to turn
VOX ON or OFF. The default is OFF.
VOX S (Sensitivity):
VOX Sensitivity determines the level of sound that is
needed for the VOX to key the transmitter. You should
experiment with VOX Sensitivity to find a level that
is appropriate to your voice but does not trigger on the
presence of too much other background noise. Set Vox
S using Menu 47. There are eight possible levels. The
default level is 3.
VOX D(Delay):
VOX Delay determines the delay to stop transmitting
after you finish speaking. Set the VOX Delay in Menu
48. Too short a delay will cause the transmitter to
41