Setting Channel Names: (Name): Menus 20 /21/22 - Leixen VV-898 User Manual

KEY: Backlight is active only when a key is pressed.
CONT: Backlight is always enabled. The default
setting is CONT.

Setting Channel Names: (Name): Menus 20 /21/22

Menu 20 determines whether the transceiver allowed
the user-defined channel name displayed or not. If it is
enable, all channel would display user-defined
channel name, if it is disable, all user-defined channel
name would not be displayed.
Menu 21 determines whether a user-defined channel
name will be displayed. Set this option to ON if you
would like to see channel names instead of merely
channel numbers. The default is OFF.
It may be helpful for you to name particular channels
with meaningful labels, such as callsigns, cities, or
channel use. Your channel names can be up to seven
characters long.
You can edit channel names using Menu 22. Access
Menu 22, press P2 to edit the first digit, press
"CHA+/CHA-/VOL+/VOL-" to select the character
desired, then press P2 to confirm and edit next digit,
after edit all digit desired, press P3 key to end edit and
press Menu key to exit. The default label for any
channel is "Name***". You may use any of the
characters in the following table in your channel
names. You can press and hold
30