Table of Contents
Advertisement
- Clean the gasoline if you have spilled.
- Keep gasoline away from any spark, flame or other source of fire.
- Do not use gasoline and oil mixture.
- Use normal or super unleaded gasoline.
- Use only fresh and clean gasoline.
- Do not store gasoline for more than a month as its quality may be
reduced.
1. Unscrew the tank lid and pour gasoline to the lower edge of the filler
cap. Do not fill the tank flush so gasoline has room to expand.
2. Wipe the remaining gasoline around the tank cap and screw it back
in.
5. USE
Start the device on a safe and flat ground, preferably not in tall grass. Make
sure that the cutting tools do not touch objects or the ground.
a. Start the engine (figure
This lawnmower can be started electrically or manually
Electrically
1. Press the priming button 3 times (red button)
2. Pull the safety bar (3) towards you and hold it.
3. Turn the key (33). The engine starts.
Manually
Take the starter rope with your right hand and pull slowly as far as to
have a resistance, and then pull energetically on the starter rope. (If the
cold start is not sufficient enough, repeat this operation 2 or 3 times).
b. Stop the engine
Release the safety lever (3). The engine turns off and the blade is slowed
down.
Regularly check the blade stopper:
Release the safety bar (3). The engine turns off and the blade is slowed
down. The blade should stop after 3 seconds.
and
)
17
Advertisement
Table of Contents
