Advertisement
Quick Links
BMW
(with M.O.S.T. 25 amplifier)
INTERFACE FEATURES
• Provides accessory power
• Retains R.A.P. (retained accessory power)
• Designed for amplified models
• Retains audio controls on the steering wheel
• Retains phone buttons (radio dependent)
• Retains factory features: date, time, temperature display
• Micro "B" USB updatable
INTERFACE COMPONENTS
• AX-BM90122 interface
• AX-BM90122 amplifier interface
• ASWC-1 interface
• AX-BM90122 harness
• ASWC-1 harness
• Female 3.5mm connector with stripped leads
APPLICATIONS
BMW
1-Series
2008-2013
2004-2013
3-Series
2006-2012
5-Series
2004-2010
AX-BM90112
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Connections to be made .......................................2
Installing the AX-BM90122 interface ....................3
Programming the ASWC-1 interface .....................3
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell
caps, etc.)
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 1/2/18 INSTAX-BM90112
Advertisement
Related Manuals for Axxess AX-BM90112
Summary of Contents for Axxess AX-BM90112
- Page 1 AX-BM90112 I N S TA L L AT I O N I N S T R U C T I O N S 2004-2013 TABLE OF CONTENTS (with M.O.S.T. 25 amplifier) Connections to be made ........2 Installing the AX-BM90122 interface ....3 INTERFACE FEATURES Programming the ASWC-1 interface .....3...
- Page 2 CONNECTIONS TO BE MADE From the aftermarket radio to the AX-BM90122 harness: From the aftermarket radio to the ASWC-1 harness: This harness is only to be used if the vehicle is equipped with steering wheel controls. • Connect the Black wire to the ground wire. •...
- Page 3 PROGRAMMING THE INSTALLING THE AX-BM90112 INTERFACE ASWC-1 INTERFACE (CONT.) With the key in the off position: L.E.D. feedback • Connect the AX-BM90122 harness to the AX-BM90122 interface. The (18) Red L.E.D. flashes represent which brand radio the ASWC-1 is connected to. Each •...