Transcal - Goldacres MY17-19 Operator's Manual

Transcal

Overview
The Transcal volumetric measuring system is
designed to provide a measuring facility without the
need for an auxiliary pump and flowmeter. When
used in conjunction with the venturi chemical
probe, or micromatic fitting, the required volume
of chemical can be transferred out of the chemical
container into the Transcal tank.
The chemical can then be transferred into the main
spray tank via venturi suction by simply turning a
valve.
The system can be used with most types of chemical
containers (including the envirodrum closed transfer
system).
NOTE: The calibration markings on the Transcal tank
should be used as a guide only.
NOTE: The Transcal system requires a vacuum to
operate. Any air leaks in the tank lid, hoses or cam
lever seals will affect the performance or cause total
failure to operate.
82 - Chapter 12 - Optional Accessories
WARNING: Do not fill Transcal tank past the 45
litre mark.
WARNING: Do not use the Transcal tank to store
chemicals when spraying.
WARNING: Do not level tank under vacuum.
Prairie 1500-3000L Operator's Manual MY17-MY19 - REV 0
Continued over page