Table of Contents
Advertisement
Delta Boom Adjustment
The tilt arm guide arms are fitted with wear strips.
It is important that these strips are maintained and
that the gap between them and the tilt arm is kept
56 - Chapter 9 - Delta Boom
UNTOL. DIMENSIONS
OPEN DIM
0.20
ONE DEC. PL.
0.10
TWO DEC. PL.
0.05
ANGULAR
0 30
To raise the outer boom,
A
remove shims from the top pivot
To lower the outer boom, remove
B
shims from the lower pivot
between 0-0.5mm either side. This ensures the tilt
arm cannot twist, prolonging the life of the product.
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS
DEBUR ALL EDGES
Sur ace Finish:
Prairie 1500-3000L Operator's Manual MY17-MY19 - REV 0
Keep distance between wear
pad and tilt arm at 0-0.5mm
REV NO
TITLE:
DATE CREATED:
DWG NO.
25/10/2013
DRAWN:
Boom With Centre
Name
MATERIAL:
DATE EDITED:
SCALE: 1:3
20/06/2014 David
CHA
GOLD
DO NOT SCA
Advertisement
Table of Contents
