Summary of Contents for PLAYSTAR HORIZON GOLD PS 73051
Page 1
Safety Zone PS 73053 PS 73052 We Will Gladly Help! • ¡Le Ayudaremos Con Mucho Gusto! • C’est avec joie que nous vous aiderons! 1-888-PLAYSTAR Monday through Friday, 8:00 A.M. to 5:00 P.M. C.S.T. www.playstarinc.com (7 52- 97 82) De Lunes a Viernes de 8:00 A.M. a 5:00 P.M. C.S.T.
Page 2
• Thoroughly read all safety instructions before Testing and Materials (ASTM) Home Playground beginning. Safety Standard. In order for PlayStar to comply with the ASTM Standard, we cannot recommend • Children must remain clear of construction site until anyone above these limits.
SAFETY INSTALLATION: seat or single planned activity should The chains or ropes provided are the be allowed on this set at one time, with maximum length designed for the swinging 1. Follow the instructions provided, do not a maximum weight of 105 pounds for element(s).
Page 4
PS 73051 Playset Anchor FC 3217 FC 3217 FP 2054 LT 7000 FP 2054 Sturdy-Frame Brace...
Page 5
PS 73052 LT 7000 FP 2054 FP 2054 Sturdy-Frame Brace Playset Anchor FC 3217 FC 3217...
Page 6
PS 73053 Playset Anchor FC 3217 FP 2054 FP 2054 Sturdy-Frame Brace FC 3217 LT 7000...
Page 7
All Design Options #8 x 1Z/v" TRX #8 x 2Z/x" TRX HW 1231 HW 1234 #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 #8 x 1¹ ₄" ³ ₈" x 1" deck screw hex bolt HW 1219 HW 1223...
Page 8
Assembly Process Icon Glossary Place tower or component in desired location. Drill through board at correct location with countersink tool and bit size shown. Drill down the depth shown into board at correct locations using bit size shown. Note: You may use any bracket as a drill template. Mark board with measurement shown for location on this step.
Page 9
Safety Warning Glossary CAUTION: Minimum spacing is required from the CAUTION: These boards should be pre-drilled closest point of all other rides or stationary objects. and countersunk to avoid cracking. Note: Adjust countersink tool to width of first board to countersink to proper depth.
Helpful Hints Make sure boards remain square. Assembly process should take place on flat surface. This helps with assembly process. Do not..._______. Be sure boards are flush. Be sure boards/brackets are tight against each other. Be sure boards/components are spaced the distance listed. Be sure to equally space.
Need help?
Do you have a question about the HORIZON GOLD PS 73051 and is the answer not in the manual?
Questions and answers