PLAYSTAR Play Action Monkey Ring Kit Building Instructions

Advertisement

Play Action
®
Building Instructions
Your tower may be different than shown. When adding to a PlayStar
Playset, follow the instructions included in your original building kit.
Intended for residential use by children ages 2 to 10, only
on properly installed PlayStar playsets. Before use refer to
complete safety guidelines in your original playset, at
www.playstarinc.com, or at 1-888-752-9782.
Only one child, for each single planned seat or single
planned activity should be allowed on this set at one time,
with a maximum weight of 105 pounds for each child.
We're Here To Help!
Important!
Warning!
Call Toll Free
Customer Service: Monday - Friday, 8:00
Shown With Components
(Purchase Separately):
(1) Climbing Rope (PS 7828)
(1 set) Climbing Rocks (PS 7830)
Lumber and Screw
(2) 4" x 4" x 8'
(3) 2" x 6" x 8'
(1) 5/4" x 6" x 10'
(2) 5/4" x 6" x 8'
(5) 2" x 4" x 8'
(140) #8 x 2¹ ₂" Deck Screws
1-888-752-9782
to 5:00
A.M.
Requirements
PS 7744
C.S.T.
P . M.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Play Action Monkey Ring Kit and is the answer not in the manual?

Questions and answers

Summary of Contents for PLAYSTAR Play Action Monkey Ring Kit

  • Page 1 Shown With Components (Purchase Separately): (1) Climbing Rope (PS 7828) (1 set) Climbing Rocks (PS 7830) Your tower may be different than shown. When adding to a PlayStar Playset, follow the instructions included in your original building kit. Lumber and Screw Important!
  • Page 2 CONTENTS TOOLS REQUIRED Monkey Ring Kit contains: Socket Wrench Square ⁷ ₁₆" & ⁹ ₁₆" Socket Phillips Screwdriver (6) Monkey Rings Adjustable Wrench (6) Chains Ladder Hammer (6) Monkey Ring Hangers ¹ ₈" & ¹ ₄" Drill Bit Tape Measure (6) Quick Links Safety Glasses Pencil...
  • Page 3 BUILDING INSTRUCTIONS Before starting to build your Play Action Set, make sure all boards are cut and identified by size and name. " " Fig. 1 " 1. Attach one 2" x 6" x 96" beam cap to one 2" x 6" x 93" beam at dimensions shown.
  • Page 4 5. Flip the step assembly over and attach one 2" x 4" x 28¹ ₂" step at dimension shown. Be sure step is square with 4" x 4" posts. Secure step with eight #8 x 2¹ ₂" deck screws. (Fig. 3) 6.
  • Page 5 A PlayStar Tower shown. Your Tower may be different. 10. Install one top header (2" x 6" x your tower width) flush with top and outside of 4" x 4" posts. The top header must be 8' as shown. Secure with eight #8 x 2¹ ₂" deck screws and two ³...
  • Page 6 Ask for Customer Service. We Will Gladly Help! PlayStar, Incorporated, Janesville, WI 53547 © 2004, 2002,1999 PlayStar, Inc. Reproduction of this document in part or whole is prohibited without the permission of PlayStar, Inc. LT 6403 R6 Printed in U.S.A.

This manual is also suitable for:

Ps 7744

Table of Contents