Summary of Contents for PLAYSTAR FACTORY BUILT RIDGELINE PS 73211
Page 1
Safety Zone PS 73213 PS 73212 We Will Gladly Help! • ¡Le Ayudaremos Con Mucho Gusto! • C’est avec joie que nous vous aiderons! 1-888-PLAYSTAR Monday through Friday, 8:00 A.M. to 5:00 P.M. C.S.T. www.playstarinc.com ( 75 2- 978 2) De Lunes a Viernes de 8:00 A.M.
Page 2
• Thoroughly read all safety instructions before Testing and Materials (ASTM) Home Playground beginning. Safety Standard. In order for PlayStar to comply with the ASTM Standard, we cannot recommend • Children must remain clear of construction site until anyone above these limits.
SAFETY INSTALLATION: seat or single planned activity should The chains or ropes provided are the be allowed on this set at one time, with maximum length designed for the swinging a maximum weight of 105 pounds for 1. Follow the instructions provided, do not element(s).
Page 4
PS 73211 FC 3174 FC 3174 Playset Anchor SA 4496 FC 3217 SA 4496 LT 7000 FC 3217 FP 2054 FC 3128 FP 2054 Sturdy-Frame Brace FC 3129 FC 3210 Discovery Telescope Climbing Rope FC 3210...
Page 6
PS 73212 LT 7000 SA 4494 Climbing SA 4494 Playset Anchor FC 3217 SA 4496 SA 4496 FC 3128 FC 3217 FP 2054 FC 3129 FP 2054 Discovery Sturdy-Frame Brace Telescope FC 3210 Climbing Rope FC 3210...
Page 7
2" x 4" x 60" 2" x 4" x 60" 1/16" = 1" 2" x 4" x 81" 2" x 4" x 81" 1/16" = 1"...
Page 8
PS 73213 Playset Anchor FC 3217 FC 3217 SA 4496 SA 4496 LT 7000 FC 3128 FP 2054 FP 2054 FC 3129 Sturdy-Frame Brace FC 3210 Discovery Telescope Climbing Rope FC 3210...
Page 9
2" x 4" x 60" 2" x 4" x 60" 1/16" = 1" 2" x 4" x 81" 2" x 4" x 81" 1/16" = 1"...
Page 10
All Design Options ³ ₈" x 1" hex bolt HW 1219 HW 1212 HW 1223 (24) #8 x B/," (23) #14 x 1Z/v" C/," x 1Z/x" #8 x ⁵ ₈" #14 x 1¹ ₄" HW 1219 SCREW LAG HDG 3/8 X 1 1/2 truss head pan head screw HW 1219 SCREW LAG HDG 3/8 X 1 1/2...
Page 11
Assembly Process Icon Glossary Place tower or component in desired location. Drill through board at correct location with countersink tool and bit size shown. Drill down the depth shown into board at correct locations using bit size shown. Note: You may use any bracket as a drill template. Mark board with measurement shown for location on this step.
Page 12
Safety Warning Glossary CAUTION: Minimum spacing is required from the CAUTION: These boards should be pre-drilled closest point of all other rides or stationary objects. and countersunk to avoid cracking. Note: Adjust countersink tool to width of first board to countersink to proper depth.
Helpful Hints Make sure boards remain square. Assembly process should take place on flat surface. This helps with assembly process. Do not..._______. Be sure boards are flush. Be sure boards/brackets are tight against each other. Be sure boards/components are spaced the distance listed. Be sure to equally space.
Page 14
(Silver- Skip to Page 21, Tower- Bronze Only Gold- Skip to Page 26) HW 1234 T-25 #8 x 2Z/x" TRX #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 Be sure roof is level with equal overhang on all four corners.
Page 20
HW 1234 T-25 #8 x 2Z/x" TRX #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 Secure both sides from behind as shown.
Page 21
(Bronze- Skip to Page 41, Tower- Silver Only Gold- Skip to Page 26) HW 1234 T-25 #8 x 2Z/x" TRX #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 Be sure roof is level with equal overhang on all four corners.
Page 31
HW 1234 T-25 #8 x 2Z/x" TRX #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 Use Dormer Drill Template from previous pages. Pre-Drill & Secure from inside the roof.
Page 32
HW 1615 Decorate or Customize your flag with fabric Rest flag markers or paint pole on (purchased roof cap. separately) before placing on flag pole. HW 1212 (2) #14 x 1Z/v" #14 x 1¹ ₄" CREW LAG HDG 3/8 X 1 1/2 pan head screw HW 1611...
Page 34
Cupola Drill Template (cut out) used in Step 8 on Page 35. TAPE TO ROOF HERE TAPE TO ROOF HERE...
Page 35
HW 1234 T-25 #8 x 2Z/x" TRX #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 Use Cupola Drill Template from previous page. Pre-Drill & Secure from inside the roof.
Page 36
HW 1234 T-25 #8 x 2Z/x" TRX #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 Be sure roof is level with equal overhang on all four corners. Leave room for bolt secured in next step.
Page 46
HW 1234 T-25 #8 x 2Z/x" TRX #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 Bronze Pictured.
Page 47
HW 1231 T-20 #8 x 1Z/v" TRX SA 4496 #8 x 1¹ ₄" deck screw SA 4496 HW 1528 (8) C/," (3) C/," x 2" HW 1301 HW 1528 BOLT HEX HDG 3/8-16 X 2 HW 1527 ³ ₈" washer HW 1411 ³...
Page 48
Anchoring- Bronze Only ³ ₈" x 1" hex bolt HW 1219 Playset Anchor C/," x 1Z/x" FC 3217 ³ ₈" x 3" lag screw HW 1219 SCREW LAG HDG 3/8 X 1 1/2 HW 1301 (5) C/," FC 3217 ³ ₈" washer...
Page 49
Anchoring- Silver Only ³ ₈" x 1" hex bolt HW 1219 Playset Anchor C/," x 1Z/x" FC 3217 HW 1219 SCREW LAG HDG 3/8 X 1 1/2 ³ ₈" x 3" lag screw HW 1301 (5) C/," FC 3217 ³ ₈" washer...
Page 50
Anchoring- Gold Only ³ ₈" x 1" hex bolt HW 1219 Playset Anchor C/," x 1Z/x" ³ ₈" x 3" lag screw HW 1219 SCREW LAG HDG 3/8 X 1 1/2 FC 3217 HW 1301 (6) C/," FC 3217 ³ ₈" washer...
Page 51
Design-A-Plaque (& Stencil Set) Decorate or Customize your plaque HW 1224 with a permanent marker (purchased separately) before placing on playset. #8 x 1" #8 x 1" truss head screw Separate stencil strips into individual letters. Punch out center of each letter. Tape stencils in place and decorate.
Page 52
Window Attachment HW 1223 (16) #8 x B/," #8 x ⁵ ₈" truss head screw FC 3084 Safety Plaque HW 1223 #8 x B/," #8 x ⁵ ₈" truss head screw Place on Swing Beam or in prominent location on Playset. LT 7000...
Page 53
Telescope FC 3128 T-25 FC 3129 HW 1234 #8 x 2Z/x" TRX #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 Rope FC 3210 HW 1604 Rope must be tight and secured at both ends.
Page 54
Monkey Rings Swings HW 1600 Adjustment Zone FC 3110 Customize the height of your chain in the Adjustment Zone to fit your child. Spiral Tube Slide PS 8823 Attach using hardware & Installation instructions included with PS 8823. Climbing Steps HW 1212 (6) #14 x 1Z/v"...
Page 55
Slide HW 1212 (3) #14 x 1Z/v" #14 x 1¹ ₄" HW 1219 SCREW LAG HDG 3/8 X 1 1/2 pan head screw Playset Anchor FC 3217 FC 3217 HW 1536 C/," x 1Z/v" 1" ³ ₈" x 1¹ ₄" hex bolt (1) HW 1301 HW 1411...
Need help?
Do you have a question about the FACTORY BUILT RIDGELINE PS 73211 and is the answer not in the manual?
Questions and answers