Advertisement
Quick Links
TM
Safety Guide & Assembly Instructions
Guide de sécurité et Instructions de montage
Directrices de Seguridad e Instrucciones de Construcción
PS 73401
Safety Zone
Safety Zone
Safety Zone
PS 73402
PS 73403
We Will Gladly Help! • ¡Le Ayudaremos Con Mucho Gusto! • C'est avec joie que nous vous aiderons!
1-888-PLAYSTAR
Monday through Friday, 8:00 A.M. to 5:00 P.M. C.S.T.
www.playstarinc.com
( 752- 9782)
De Lunes a Viernes de 8:00 A.M. a 5:00 P.M. C.S.T.
(450) 699-3083
Du lundi au vendredi, de 8 h à 16 h EST
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for PLAYSTAR FACTORY BUILT PS 73401
Summary of Contents for PLAYSTAR FACTORY BUILT PS 73401
- Page 1 Safety Zone PS 73402 PS 73403 We Will Gladly Help! • ¡Le Ayudaremos Con Mucho Gusto! • C’est avec joie que nous vous aiderons! 1-888-PLAYSTAR Monday through Friday, 8:00 A.M. to 5:00 P.M. C.S.T. www.playstarinc.com ( 752- 9782) De Lunes a Viernes de 8:00 A.M. a 5:00 P.M. C.S.T.
- Page 2 • Thoroughly read all safety instructions before Testing and Materials (ASTM) Home Playground beginning. Safety Standard. In order for PlayStar to comply with the ASTM Standard, we cannot recommend • Children must remain clear of construction site until anyone above these limits.
-
Page 3: Annual Maintenance Checklist
SAFETY INSTALLATION: seat or single planned activity should The chains or ropes provided are the be allowed on this set at one time, with maximum length designed for the swinging 1. Follow the instructions provided, do not a maximum weight of 105 pounds for element(s). - Page 4 PS 73401 LT 7000 Playset Anchor FC 3217 FC 3217...
- Page 5 PS 73402 LT 7000 Playset Anchor FC 3217 FC 3217...
- Page 6 PS 73403 LT 7000 Playset Anchor FC 3217 FC 3217...
- Page 7 All Design Options HW 1231 HW 1223 (16) #8 x 1Z/v" TRX #8 x B/," #8 x ⁵ ₈" ³ ₈" x 1" #8 x 1¹ ₄" truss head hex bolt deck screw screw HW 1201 HW 1219 C/," x 3" C/,"...
- Page 8 Assembly Process Icon Glossary Place tower or component in desired location. Drill through board at correct location with countersink tool and bit size shown. Drill down the depth shown into board at correct locations using bit size shown. Note: You may use any bracket as a drill template. Mark board with measurement shown for location on this step.
- Page 9 Safety Warning Glossary CAUTION: Minimum spacing is required from the CAUTION: These boards should be pre-drilled closest point of all other rides or stationary objects. and countersunk to avoid cracking. Note: Adjust countersink tool to width of first board to countersink to proper depth.
-
Page 10: Helpful Hints
Helpful Hints Make sure boards remain square. Note: Assembly process should take place on flat surface. This helps with assembly process. Do not..._______. Be sure boards are flush. Be sure boards/brackets are tight against each other. Be sure boards/components are spaced the distance listed. Be sure to equally space. - Page 11 (Silver- Skip to Page 12, Bronze Only Gold- Skip to Page 16) ³ ₈" x 1" hex bolt HW 1219 Playset Anchor C/," x 1Z/x" FC 3217 ³ ₈" x 3" lag screw HW 1219 SCREW LAG HDG 3/8 X 1 1/2 HW 1301 (4) C/,"...
- Page 12 Silver Only (Gold- Skip to Page 16) HW 1411 HW 1301 (8) C/," C/," C/," x 2" HW 1528 ³ ₈" lock nut HW 1528 BOLT HEX HDG 3/8-16 X 2 ³ ₈" washer Bolt heads located on the inside. HW 1231 T-20 #8 x 1Z/v"...
- Page 13 HW 1231 T-20 #8 x 1Z/v" TRX #8 x 1¹ ₄" deck screw 3Z/x" Repeat process for both frames. 21Z/x" 96" Dig into ground for leg beams. 2Z/x"...
- Page 14 HW 1201 HW 1301 (4) C/," C/," x 3" ³ ₈" x 3" lag screw ³ ₈" washer HW 1201 SCREW LAG HDG 3/8 X 3 Repeat process for both frames.
- Page 15 ³ ₈" x 1" hex bolt HW 1219 Playset Anchor C/," x 1Z/x" HW 1219 SCREW LAG HDG 3/8 X 1 1/2 ³ ₈" x 3" lag screw FC 3217 HW 1301 (8) C/," FC 3217 ³ ₈" washer Alternate anchors on every other wall.
- Page 16 Gold Only HW 1231 T-20 #8 x 1Z/v" TRX #8 x 1¹ ₄" deck screw 3Z/x" 21Z/x" Be sure boards face opposite directions so the monkey ring chains are staggered. 60"...
- Page 17 HW 1201 HW 1301 (4) C/," C/," x 3" ³ ₈" x 3" lag screw ³ ₈" washer HW 1201 SCREW LAG HDG 3/8 X 3...
- Page 18 ³ ₈" x 1" hex bolt HW 1219 Playset Anchor C/," x 1Z/x" HW 1219 SCREW LAG HDG 3/8 X 1 1/2 ³ ₈" x 3" lag screw FC 3217 HW 1301 (8) C/," FC 3217 ³ ₈" washer Alternate anchors on every other wall.
- Page 19 This page left blank intentionally.
- Page 20 © 2018 PlayStar, Incorporated, PO Box 1777, Janesville, WI 53547 www.playstarinc.com Reproduction of this document in part or whole is prohibited without the permission of PlayStar, Inc. Protected by one or more of the following United States or Foreign Patents: US D418,189; US D409,708; US D424,154; US D428,637; US 6,402,663; US D422,332; US D410,059;...
Need help?
Do you have a question about the FACTORY BUILT PS 73401 and is the answer not in the manual?
Questions and answers