Vts Management - Dahua DHI-VTO3211D-P4-S1 User Manual

Swipe the card that needs to be authorized on the VTO, and then the Issue Card
dialogue box is displayed. See Figure 5-8.
Enter the name you need, then click Save, and then click Confirm Send Card at the
countdown notice (Figure 5-7).
The issued access card is displayed. See Figure 5-9.
You can configure the access card.
Click

card can be used to issue access card for this room on the VTO. Click again to
resume.
Click

under lost state cannot be used to open the door. Click again to resume.
Click

Click


VTS Management

You can add VTS device to the SIP server, and the VTS can be used as the management
center. It can manage all the VTO and VTH devices in the network, make or receive video call
from them, and make basic configurations. For the detailed introduction, see the corresponding
user's manual.
Log in the web interface of the SIP server, and then select Household Setting > VTS
Management
The VTS Management interface is displayed. See Figure 5-10.
Countdown notice
Issued access card
to set it to the main card, and then the icon turns into
to set it to the lost state, and then the icon turns into
to modify the user name.
to delete the card.
Issue card
. The main
. The card
Household Setting 17