Household Setting; Vto No. Management; Adding Vto - Dahua DHI-VTO3211D-P4-S1 User Manual

Configure parameters, and for the detailed description, see Table 4-5.
Parameter
CGI Enable
Reset Password
Click Save to save.
This chapter applies to the condition in which the VTO works as SIP server (see 6.3 SIP Server),
and it introduces how to add, modify, and delete VTO, VTH, VTS, and IPC devices, and how to
send messages from the SIP server to other VTO and VTH devices. If you are using other
servers as SIP server, see the corresponding manual for the detailed configuration.

VTO No. Management

5.1.1 Adding VTO

You can add VTO devices to the SIP server, and all the VTO devices connected to the same
SIP server can make video call between each other.
Log in the web interface of the SIP server, and then select Household Setting > VTO
No. Management.
The VTO No. Management interface is displayed. See Figure 5-1.
Table 4-5 Security parameter description
Description
Select the check box to enable, and then you can use CGI command.
Select the check box to enable, and then the password resetting is
available.
5
Security

Household Setting

Household Setting 12