1 Framework 1.1 Front Panel Please connect the device to the power socket; you can see the power indication light is on. After system booted up, you can see the front panel is shown as below. See Figure 1-1. Figure 1-1 Please refer to the following sheet for detailed information.
alarm information status information. indication light The indication light is on (red) when there is any missed call. The indication light is on (red) when there is any unprocessed alarm, Network status indication The indication light is on (green) when the network light connection is OK.
2 Basic Operations 2.1 Emergency Call In Figure 1-1, click the emergency call button, the indoor monitor will generate an emergency call to the management centre. The person in the management centre can pick up the phone to implement the bidirectional talk with the indoor monitor. See Figure 2-1. You can click the Hang up button to end the call and then go back to the main interface.
Figure 2-3 2.3 Monitor In the main interface, click the Monitor button; you can view the video from the outdoor station. See Figure 2-4. You can implement the following operations. Click the Next button to view the video from the next outdoor station if there are several stations.
view the video. The system automatically hangs up after 15 seconds and goes back to the standby interface. See Figure 2-5. Figure 2-5 2.4.2 Unlock During the Talk During the talk process, you can click the Unlock button to open the outdoor station door remotely.
In the main interface, from Menu->Alarm log 2, you can go to the search alarm information interface. Here you can search all kinds of alarm records. You can click the PgDn button to view more if it is more than one page. 2.7 DND Function This series product supports the do-not-disturb (DND) function.
Page 10
For the volume and brightness setup, you can click the “+” to increase current value and click the “-” to decrease current value. For the password setup, you can click “+” to increase the current value and click the “-” to decrease the current value.
3 Specifications Video Video compression H.264 standard Audio Bidirectional talk Dual-way bidirectional talk Screen Dimensions Color 3.5-inch TFT LCD Resolution 320*240 Alarm Input (Extension Cable, 4-channel function ) Output Network Others Power DC 10~15V Power Standby<1W,work<5W consumption Working -10℃~50℃ environments Dimensions 205 mm * 135 mm * 23 mm(L*W*H)...
4 FAQ Q: My indoor monitor screen is black and the indication light is off. What shall I do? A: Please check the power socket connection is OK or not. Q: My indoor monitor can not generate a call and implement the monitor function. The network indication light is off.
Need help?
Do you have a question about the DH-VTH111 Series and is the answer not in the manual?
Questions and answers