Miller Maxstar 300 DX Owner's Manual page 46

Hide thumbs Also See for Maxstar 300 DX:
Table of Contents

Advertisement

C. Reconfiguring RMT 2T HOLD For 2T, Spot, 4T, 4T Momentary, Or Mini Logic Control
1
For RMT STD (Remote Standard), RMT
2T Hold (Remote 2T Hold), and On trig-
ger operation, see Section 4-19A, B,
and H.
1
Process Switch Pad
2
Output Switch Pad
3
Power Switch
OM-2222 Page 40
SEL
2
And
To access the RMT 2T HOLD reconfi-
guration screen, turn power switch on,
and then press the Process and Output
switch pads before the software version
clears the meters. Hold the switch pads
until software version clears the meters
and [SEL] [H 2], [SEL] [SPO], [SEL] [H 4], [SEL]
[H4L], or[SEL] [H4E] appears.
4
Encoder Control
Turn Encoder to change functions. Ac-
tive function will be displayed on amper-
age (right) meter.
4
H-2
Or
V
Rear Panel
5
Meter Displays
Meter displays for the different functions
will be as shown.
Press torch trigger or turn power Off to
save setting.
NOTE: After 2T has been reconfigured
and one of the reconfigured functions is
selected during normal operation, H-4,
H4L, H4E or SPO will be displayed for 5 sec-
onds as a reminder to the operator.
Or
Or
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Maxstar 300 sdMaxstar 300 lx

Table of Contents